Skip to content

Targets

Steps for

Use Targets to agree what the month should bring in, then check each day whether it will. A category that's behind shows what it needs a day to catch up, and each rep's share of the target shows who can close the gap.

New to Pulse? Start with Pulse for how to open it.

How it works

You set a target for a month. Pulse compares it with the month's orders so far, and works out where the month will end if orders keep coming at the same rate. A month that's 40% through with $4,000 of orders is heading for $10,000.

There are 3 kinds of target:

TargetWhat it measuresWho sees it
Store targetThe whole store's month, in one of 4 measures: GMV (the total value of orders), Orders, Active buyers or Average order valueEveryone with Pulse
Category targetOne product category's revenue for the monthEveryone with Pulse
Rep targetOne sales rep's month: their whole business, or their share of the category targetsThe rep, and a Sales admin who sees the whole store

A target applies to every month from the one you set it in, until you change or remove it. To make one month different, such as a busy season, give it its own figure: see Plan targets month by month.

Turn on Targets

Targets is off to start with, so nobody sees it until you're ready.

  1. Go to Storefront,Options,Pulse (opens in your SparkLayer Dashboard in a new tab).
  2. Turn on Targets.
  3. Click Save & publish.

Targets then appears in the Pulse sidebar, under Activity, for everyone with Pulse. It needs Core Script version 5.0.34 or later: check your version at Storefront,Widgets,SparkLayer version (opens in your SparkLayer Dashboard in a new tab). On an earlier version, the setting asks you to update first.

Who can set and see targets

Everyone with Pulse sees the same Targets page, with the whole store's month and every category's revenue, whatever their sales rep groups. Only a Sales admin who sees the whole store can change it. See Who can see what in Pulse.

RoleTargets
Sales admin with no sales rep groupsSets the store, category and rep targets, and sees By rep and Where the growth is.
Sales admin with sales rep groupsSees the store and category targets, but can't change them.
Sales rep, or a custom roleSees the store and category targets, but can't change them, and their own targets in Your targets.

When a Sales admin who sees the whole store uses Viewing as to see Pulse as one rep, Targets shows that rep's own targets, and nothing can be changed. Switch back to Total company view to set targets again.

The Targets screen

From top to bottom:

PartWhat it shows / does
Your targetsFor a rep: their own month against their target. See If you're a sales rep.
Categories on pace tileHow many category targets are on pace or better, such as 5 of 8, with how many are already hit and how many are behind.
Category targets tileThe targeted categories' month so far, against their targets added up, and what they're heading for.
Short at this pace tileHow far the categories that are behind will fall short, added up.
Reps on pace tileHow many reps with a target are on pace, each against their own target. Only shown to a Sales admin who sees the whole store.
Month so farThis month's GMV so far, the number of orders and the day of the month, such as day 20/30.
ProjectedWhere the month's GMV is heading, such as ≈$18,500.
vs last monthThe projection against last month's full GMV, such as +12% with ahead of $16,500.
Store targetThe store's target for the month, with a bar to the projected end of the month. See The store's target.
Category targetsOne row per category, against its target. See Category targets.
By repEach rep against their target. Only shown to a Sales admin who sees the whole store.
Where the growth isThe categories most of your active buyers don't buy yet. Only shown to a Sales admin who sees the whole store.

Targets is always this month, so the date range at the top of Pulse doesn't change it. Its figures come from the same analytics as the rest of Pulse, so orders placed since Last updated show after the next refresh.

The store's target

The store's target card shows the month against one measure. Pick it from the menu at the top of the card: GMV, Orders, Active buyers or Average order value. It opens on the first measure that has a target, or GMV.

Text on the cardMeans
92% projected · ≈$800 short at this paceThe month is heading for less than 95% of the target.
98% projected · on pace to hit itThe month is heading for between 95% and 105% of the target.
112% projected · on track to hit itThe month is heading for at least 105% of the target.
Target hit · 102% of it so farThe month has already reached the target.
Too early to call · 6% of it so farLess than 2 days of the month have gone, too soon to say.
97% of target · $8 under it, or 103% of target · at or above itFor Average order value, which is compared as it stands rather than projected. With no orders yet this month, it says No orders yet this month.

The foot of the card counts the measures with a target this month, such as 2 targets set. Anyone who can't change targets sees Set by your manager there, and No company target this month. if there isn't one.

Set the store's target

  1. In Pulse, click Targets in the sidebar.
  2. On the store's target card, click Set a target. If there's one already, click Edit.
  3. Under Metric, choose GMV, Orders, Active buyers or AOV.
  4. Under GMV each month (or the measure you chose), type the target, such as 12,000.
  5. Click Save target.
More detail

Every target is a whole number above zero. GMV and AOV are in your store's currency. To stop tracking a measure, click Remove on the card. It removes the target from this month on, and Undo in the message sets this month's figure again.

Plan targets month by month

To give some months their own target, such as a busy season, use Plan per-month targets.

  1. Open the target: Edit on the store's card, the calendar beside a category target or a rep's part, or the pencil beside a rep on By rep.
  2. Click Plan per-month targets. It lists this month and the 11 after it.
  3. Type a target in any month that should differ. A month you leave empty uses the Default target.
  4. Click Save target.
More detail

To grow the target each month, click +5%, +10% or +20% beside ramp. Pulse fills this month and the 11 after it, each that much more than the month before, starting from the Default target. The ramps only work once there's a default target to start from. Change any month afterwards. A month you leave the same as the default isn't saved on its own, so it follows the default if you change it later. A dot on the calendar beside a target shows that some months are planned on their own.

To remove a category or rep target and every month you've planned, click Remove target. Undo in the message brings it back.

Category targets

The Category targets table shows each of your store's product categories against its target for the month.

ColumnWhat it shows
CategoryThe category, with how many of its products sold in the last 13 months and its share of this month's product revenue. Click a category with an arrow to open it: the categories inside it and, for a Sales admin who sees the whole store, each rep's share.
Month to dateThe category's revenue this month so far.
TargetThe category's target. Click it to change it.
PaceA bar of the month so far against the target, as a percentage.
Heading forWhere the category's month is heading at this rate.
StatusWhere the category stands: see Category statuses. A category that's behind also shows what it needs a day to hit its target, such as $137 a day to land it.
BaselineThe category's usual month: its average over the last 3 full months.
Same month last yearThe category's revenue in this month last year, headed with the month, such as Nov 25.

Categories with a target come first, then the rest by their Baseline. Categories with no target and no sales in the last 13 months fold into one line, such as 6 more categories with no target or sales: click it to list them. The last row, Uncategorised, is the revenue of products that aren't in any category, including products no longer in your catalogue. It has no target, and only shows when there's revenue to show.

Until your store's product categories sync, the table says No categories yet.

Category statuses

StatusMeans
Target hitThe category has already reached its target this month.
AheadIt's heading for at least 105% of its target.
On paceIt's heading for between 95% and 105% of its target.
BehindIt's heading for less than 95% of its target.
Too earlyLess than 2 days of the month have gone.
No targetThe category has no target.

Set a category target

  1. In the Category targets table, click a category's target. With no target, click Set, or Set · $650? to start from the suggested figure.
  2. Type the target, such as 25,000.
  3. Press Enter, or click away. Pulse saves it.
More detail

If you've planned this month on its own, typing here changes this month only. Otherwise it changes every month. Press Esc to leave a target as it was. To plan the months ahead, click the calendar beside the target: see Plan targets month by month.

To clear this month's target, empty the field and press Enter. To remove the target and every month you've planned, click the calendar, then Remove target. Clearing a category's target also clears each rep's share of it, and Undo brings back the category's target only.

To set every top-level category without a target at once, click Fill 4 from suggestions (or however many there are) at the top of the card. Each gets its suggested figure, and Undo in the message takes them all back.

The suggested target is the category's Baseline plus 5%, rounded.

More detail

Suggestions are rounded to the nearest 50 under 1,000, the nearest 100 under 10,000 and the nearest 500 above that, and are never less than 50, 100 or 500.

Split a category's target between reps

Give each rep a share of a category's target, so each knows what they're aiming for. A rep's shares add up to their own target, unless you give them a target for their whole business.

  1. In the Category targets table, click a category to open it. Under it, a list such as Garden by rep shows each rep with their share of the category.
  2. Click Split by share. Each rep gets a part of the target in line with their share of the category's revenue over the last 3 full months.
  3. To change one rep's part, click it and type the figure, or click the calendar beside it to plan it month by month.
More detail

The header shows how much of the target is given out, such as $18,000 of $25,000 given to reps, and says doesn't add up to the target if the reps' parts add up to more. No rep is the revenue from accounts that aren't in any rep's book: its target is whatever the reps' parts leave.

Split by share covers your planned months too, and Undo in the message takes the split back. A rep with no sales in the category gets no part. Changing a category's target doesn't change the reps' parts, so split it again afterwards.

To split every category at once, click Split every category by share on the By rep card. A category needs a target before it can be split: until then it says, for example, Set a target for Garden to split it between reps. If no rep has sold in the category in the last 3 months, it says so instead.

Set a rep's target

The By rep card lists each rep against their target: their whole business, or their share of the category targets. Reps with a target come first.

  1. On the By rep card, click the pencil beside a rep. Target for Sam Patel (or the rep's name) opens.
  2. Type the rep's target for their whole business each month, excluding tax and shipping.
  3. Click Save target.

Leave it empty to measure the rep by their share of the category targets instead. To go back to that later, open the rep's target and click Remove target. Click a rep's name to see Pulse as that rep, with Viewing as. Until your store has sales reps, the card says No reps to set targets for yet.

Find where the growth is

Where the growth is lists up to 8 top-level product categories that most of your active buyers don't buy yet, such as 12 of 40. Active buyers are the accounts that have ordered in the last 12 months or this month. Each row shows how many don't buy it, and what a typical buyer spends on it a month, such as 28 don't · $140/mo each. Suggest these categories to the accounts that don't buy them.

If you're a sales rep

Once you have a target, Your targets shows at the top of Targets, and on your Overview while its date range ends today:

  • Your month so far against your target, and where it's heading.
  • How many of your categories are on pace, furthest behind first: 4 are shown, and the rest fold away.
  • Who to ring: up to 5 accounts buying less than usual in your categories that are behind.

You can't change your targets. A Sales admin who sees the whole store sets them.

Targets elsewhere in Pulse

WhereWhat it shows
OverviewA ring on the Your month tile shows the month against the store's GMV target. Above the chart, Category targets shows the 4 categories furthest behind, or Your targets for a rep. The chart draws the target for the measure it shows as a line, on its monthly view.
OrdersThe orders chart draws the store's GMV target as a line when it shows months, or its Orders target if there's no GMV one.
ProductsThe Categories card shows each top-level category's month against its target, with Manage targets to open Targets.

The ring, the target lines and the Categories card are only shown to a Sales admin who sees the whole store, in Total company view.

How the figures are worked out

FigureHow it's worked out
Projected, Heading forThe month so far, divided by the share of the month gone. Pulse doesn't project until 2 days of the month have gone.
vs last monthThe projection against last month's full GMV.
Category revenueProduct revenue, excluding tax and shipping. A product in more than one category counts in each, so categories can add up to more than the store.
BaselineThe average of the category's last 3 full months.
A rep's shareThe rep's revenue in the category over the last 3 full months, as a share of the category's.
$137 a day to land itWhat the category still needs, divided by the days left in the month.
MonthsEach new day and month starts at midnight UTC, whatever your time zone. In the UK, that's midnight in winter and 1am in summer.

Targets counts the same orders as the rest of Pulse. See Which orders Pulse counts.

FAQs

Was this page helpful?

Last updated